Vanguard MK-2 structural firefighting glove pair with black Kevlar knit and tan leather palm
Vanguard MK-2 glove back-of-hand view showing cowhide reinforcement and knuckle padding
Vanguard MK-2 glove palm close-up showing kangaroo skin grip surface and sewn-down palm layers
Vanguard MK-2 long-cuff glove worn on hand demonstrating tailored fit and finger dexterity
Vanguard MK-2 structural firefighting glove pair with black Kevlar knit and tan leather palm
Vanguard MK-2 glove back-of-hand view showing cowhide reinforcement and knuckle padding
Vanguard MK-2 glove palm close-up showing kangaroo skin grip surface and sewn-down palm layers
Vanguard MK-2 long-cuff glove worn on hand demonstrating tailored fit and finger dexterity
Vanguard MK-2 structural firefighting glove pair with black Kevlar knit and tan leather palm
Vanguard MK-2 glove back-of-hand view showing cowhide reinforcement and knuckle padding
Vanguard MK-2 glove palm close-up showing kangaroo skin grip surface and sewn-down palm layers
Vanguard MK-2 long-cuff glove worn on hand demonstrating tailored fit and finger dexterity

Vanguard MK-2 Structural Firefighting Glove — NFPA 1970-2025 Certified

Regulärer Preis $105.00
Verkaufspreis $105.00 Regulärer Preis
Einzelpreis
Stelle eine Frage

Stelle eine Frage

* Benötigte Felder

 Größentabelle Aktie
PRODUCT INFO

Model #6877

The next-generation MK-1, now NFPA 1970-2025 certified. Five layers of Kevlar. Kangaroo palm. A tailored fit that lets you tie a knot with gloves on — and a leather grab patch that gets you out of wet gloves in seconds.

Why crews are switching to the MK-2

  • PFAS-compliant construction — meets the newest 2025 NFPA standard, ahead of most competitors still selling 2018-cert gloves.
  • Third Kevlar seam at fingertips — the highest-wear zone on any structural glove, now built to outlast a full department contract cycle.
  • Integrated leather grab patch — improves wet don/doff dramatically over the original MK-1.
  • World-class dexterity — kangaroo palm and fourchette fingers mean you can operate a radio, tie knots, and manage tools without stripping gloves off.

Protection

  • 5 layers of 100% Kevlar / Para-aramid knit — premium thermal, cut, and puncture resistance
  • Cowhide-reinforced back shell for radiant heat resistance
  • NFPA 1971-compliant moisture barrier blocks chemicals and bloodborne pathogens

Performance

  • Kevlar/Para-aramid knit with kangaroo skin palm and thumb — flexibility, grip, and dexterity
  • Sculpted fingertip design for maximum tactility
  • Sewn-down palm layers for a more efficient grip

Durability

  • Premium leather + 100% Kevlar rugged construction
  • Reinforced thumb crotch protects the highest wear area
  • Inner liner sewn and bonded at the fingertips

Sizing (size up if between sizes — the MK-2 runs tailored)

The first number is your index finger length; the letter is hand width across the knuckles.

Available: 64N (XXS) · 70N (XS) · 70W (S) · 76N (M) · 76W (L) · 82N (XL) · 82W (2XL) · 82XW (3XL) · 4XL · 5XL

Vanguard MK-2 structural firefighting glove sizing chart with index finger length and hand width measurements

Wash care

  • Hand wash in mild detergent (Tide Free / dishwash liquid); hang or machine dry low-medium
  • If using a gear extractor, avoid turnout gear detergent — it strips leather oils
  • After drying, rub Barbasol shave cream on the leather to preserve natural oils and extend life

Trust & terms

  • Ships in 1 business week
  • Department POs welcome on 6+ pairs
  • Lifetime warranty on defective workmanship and materials
  • Certified compliant to NFPA 1970-2025 Standard

FAQ

How does the sizing compare to my current gloves? MK-2 runs tailored — most firefighters trade up one size from their current glove.

Are these good for hot wash or extractor cycles? Yes, with the caveats above on detergent choice.

PFAS-free? Yes — fingertips are officially labeled for PFAS compliance.